Table of Contents
Advertisement
Machine Translated by Google
Insert MD
1 Open the door until you hear a click.
When the ignition key of the car is ON, the inside lights up (when the ignition
key is OFF, it lights up for about 1 minute when the door opens).
Precautions when opening and closing the door
Do not push hard on the transparent part of the door. It may cause damage or injury.
Do not put your hands inside the changer as it may cause injury.
2 Insert the MD until you hear a click.
Put the label side up in the direction of the arrow
3 Close the door until you hear a click.
Be sure to close the door. If dust or dirt gets in,
the lens of the internal optical system will get dirty and cause sound skipping. Also, if a foreign object gets inside, it may cause a malfunction.
12
c
please note
Make sure the MD shutter is closed
Please put it in after that.
Note
When the MD is inserted and the door is closed or
reset, the unit automatically operates and reads
the MD information. All in this machine
It will stop after reading the MD information. At that
time, the inside blinks, but it is not a malfunction.
Hmm.
Advertisement
Table of Contents
