Multi-Color Led Keyboard (Option) - Schenker WORK 15 User Manual

Multi-Color LED Keyboard (Option)

The LED Keyboard application can be accessed by click-
ing LED Keyboard in the Control Center (or by press-
ing the Fn plus key) or from the Start menu in
Windows .
Figure 9 - LED Keyboard Application
The keyboard LED may be configured using the Fn + key
combination outlined in the table below.
Keyboard LED Function key Combinations
Launch the LED Keyboard
Fn +
Application
Toggle the Keyboard LED
Fn +
On/Off
Keyboard LED Illumination
Fn +
Decrease
Keyboard LED Illumination
Fn +
Increase
Table 4 - Keyboard LEDs
Color Swatch
The color swatch in the middle of the screen allows you to
select a range of colors for your keyboard backlight by
clicking on the color required. Click to select any color
from the swatch to apply to the keyboard.
On boot the key-
board will mo-
mentarily flash.
KB Sleep Timer
You can click in
the Override
Enable and then select the amount of time for which the
Boot Effect
system is idle before the keyboard LED enters sleep mode
check box to
disable the key-
(i.e. the LED keyboard illumination will turn off to save
board flashing
effect as the power).
system boots.
KB Brightness
You can adjust the keyboard brightness using the Bright-
ness slider.
15