Advertisement
.
Care and Maintenance Instructions Model : Z1457
Removing and replacing a handle
MODEL SHOWN :Z 1457
❶
Loosen and unscrew the retaining flange
A, from the tap body.
❸
To reassemble, reverse the disassembly
procedure, given above.
The retaining flange only needs to be hand
tight.
Note: DO NOT USE A SHIFTER TIGHTEN BY
HAND ONLY !
Do not over tighten as this could damage the
ceramic cartridge!
Available replacement handles:
-El Capitan Handle
-78 Mont Blanc Handle
-78A Mont Blanc Antique Crackle
-78B Mont Blanc Black
Further information Phone (03) 9761 4603
7
❷
Once totally loose, simply remove the
handle from cartridge spline.
NOTE: At any time, should the handle feel loose,
retighten the retaining flange by hand.
See our video: https://youby tu.be/PUbD3GHgg58
sales@sinkandtap.com.au
Advertisement
