Advertisement
Installation Instructions
Preparation
Flush out the pipework to remove any foreign
matter.
The hot supply should be on the left when viewed
from the front of the fitting.
Water supply should Installed a minimum of 60 mm
above fixture rim.
❶
Assembly
Connect the ¾" male to ½" female bush adaptors
(A), to the1/2" (21mm) water supply pipes.
❷
Assemble the round cap covers (B), over the
Bush adaptors.
❸
Fix the body of sink mixer (D), placing the
fibre washer (C), between the nut and the ¾"
male to ½ " female bush adaptors.
Ensure all connections are firmly tightened.
Further information Phone (03) 9761 4603
3
Model : Z1457
sales@sinkandtap.com.au
Advertisement
