Installation Instructions
❹
Introduce the spout (E) in the central
hate of the body (D) and screw the nut
(F).
❺
Before use
Turn on the Hot and Cold supplies to the tap.
Maximum temperature for Hot water supply to the tapware is 62 °C.
Minimum recommended pressure is 100 kPa — Maximum recommended pressure is 500 kPa.
Check the installation carefully for leaks.
If further building work is to be carried out in the vicinity of the tapware, it should be covered to
prevent paint, adhesive, etc. from damaging the surface.
Further information Phone (03) 9761 4603
4
Model : Z1457
sales@sinkandtap.com.au