Table of Contents
Advertisement
nents. Using aggressive detergents may damage the surface treatment of these
components.
TO CLEAN THE LIGHT ASSEMBLIES, USE A SPONGE SOAKED IN WATER AND
MILD DETERGENT, GENTLY RUBBING THE SURFACE AND RINSING FRE-
QUENTLY WITH PLENTY OF WATER.
DO NOT CLEAN THE FRONT LIGHT ASSEMBLY WITH DETERGENTS CONTAIN-
ING TENSIOACTIVE AGENTS AND/OR ALCOHOL.
REMEMBER TO CLEAN THE VEHICLE CAREFULLY BEFORE APPLYING SILI-
CON WAX POLISH. DO NOT POLISH MATT-PAINTED SURFACES WITH POL-
ISHING PASTE. THE VEHICLE SHOULD NEVER BE WASHED IN DIRECT
SUNLIGHT, ESPECIALLY DURING SUMMER, OR WITH THE BODYWORK STILL
HOT AS THE CAR SHAMPOO CAN DAMAGE THE PAINTWORK IF IT DRIES BE-
FORE BEING RINSED OFF.
CAUTION
DO NOT USE WATER (OR LIQUIDS) AT TEMPERATURES OVER 40°C (104°F)
WHEN CLEANING THE VEHICLE PLASTIC PARTS. DO NOT AIM HIGH PRES-
SURE AIR/WATER JETS OR STEAM JETS DIRECTLY ON THESE COMPO-
NENTS. DO NOT USE ALCOHOL OR SOLVENTS TO CLEAN ANY RUBBER OR
PLASTIC SADDLE COMPONENTS USE WATER AND MILD SOAP.
CAUTION
DO NOT APPLY PROTECTIVE WAX ON THE SADDLE AS IT MAY BECOME SLIP-
PERY.
90
Advertisement
Table of Contents
