Headlight adjustment (04_35, 04_36)
NOTE
IN COMPLIANCE WITH LOCAL LEGAL REQUIREMENTS, SPECIFIC PROCE-
DURES MUST BE FOLLOWED WHEN CHECKING LIGHT BEAM ADJUSTMENT.
04_35
For a quick check of the correct direction of the front light beam:
•
Place the vehicle 10m away from a vertical wall and make sure the ground
is level.
•
Turn on the low-beam light, sit on the scooter and check that the light beam
projected to the wall is a little below the headlight horizontal straight line
(about 9/10 of the total height).
To adjust the light beam:
•
Working from both sides, undo screw «1».
•
Adjust the headlamp until the desired position is obtained
04_36
•
Working from both sides, tighten screw «1».
83