Canon FS40 Instruction Manual page 95

System Setup 2
Menu item
[Notification Sounds]
[Power Saving Mode]
[Quick Start]
/
[Initialize
[Initialize ]
[Delete All Web Movies
]
[Photo Numbering]
[Firmware]
[Eye-Fi Communication]
1
Option available only from the [Movies] or [Video Snapshot] index screen.
2
Option available only after having inserted an Eye-Fi card in the memory card slot.
[Notification Sounds]:
ing on the camcorder, the self-timer countdown, etc.
[Power Saving Mode]:
powered by a battery pack, it will automatically shut off if left without any
operation for 5 minutes.
• Approximately 30 seconds before the camcorder shuts off, [Auto
Power Off] will appear.
• In standby mode, the camcorder will shut off after the time selected for
the [Quick Start] setting.
[Quick Start]:
Select whether to activate the Quick Start function (
when you close the LCD panel in a recording mode and the length of
time after which the camcorder will end the standby mode and shut off
automatically.
[Photo Numbering]:
new memory card. Photos are automatically assigned consecutive num-
[
[
[ On], [
[ Off], [
[ 20 min], [
] [Built-in Mem.], [Mem. Card]
[Quick Initialization],
[Complete Initialization]
[No], [Yes]
[ Reset], [
–
2
[ Automatic], [
A beep will accompany some operations like turn-
In order to save power when the camcorder is
Select the photo numbering method to be used on a
Setting options
High Volume],
Low Volume], [
Off]
10 min],
30 min]
Continuous]
Off]
Off]
–
1
–
– –
Additional Information
–
–
– –
35
– 86
–
–
88
41)
95