Canon FS40 Instruction Manual page 28

Selecting an Option from the FUNC. Menu
The following is an example of selecting a FUNC. menu option in
mode. In playback modes, the operation varies depending on the
function selected so refer to the relevant chapter as necessary.
FUNC.
1 Press
2 Select ( ) the icon of the function
you want to change from the left
side column.
Menu items not available will appear
grayed out.
3 Select (
bottom bar.
• The selected option will be highlighted in orange.
• With some settings you will need to make further selections and/or
press . Follow the additional operation guides that will appear on
the screen (such as the
FUNC.
4 Press
You can press
Selecting an Option from the Setup Menus
FUNC.
1 Press
2 Select ( ) [
to open the setup menus.
You can also hold
down for more than 1 second to
open directly the setup menus
screen.
3 Select (
4 Select ( ) the setting you want to change and press
• The orange selection bar indicates the menu setting currently
selected. Menu items not available appear grayed out.
• Move (
screen to select a different menu (step 3).
5 Select ( ,
setting.
28
Preparations
.
) the desired setting from the available options at the
to save the settings and close the menu.
FUNC. to close the menu at any time.
.
Menu] and press
FUNC. pressed
) the tab of the desired menu.
) the orange selection bar to the tabs at the top of the
) the desired option and press
icon, small arrows, etc.).
.
to save the