Canon FS40 Instruction Manual page 84

mode: Transferring movies
3 Camcorder: When the connection is successfully established,
[PC Connection] appears on the screen.
4 Computer: Depending on the software you chose to install,
Transfer Utility SD or VideoBrowser SD will start up
automatically.
• Transfer Utility SD: Click [Video file import] to start transferring files.
For details about using the software, click [Help] to open the
Software Guide (PDF file).
• VideoBrowser SD: Click
transferring files. For details about using the software, click
open the Software Guide (PDF file).
mode: Transferring photos
3 Camcorder: When the connection is successfully established,
[PC Connection] appears on the screen.
4 Computer: The camcorder will appear as a new device (or drive),
for example, [Canon FS40]*. Use the program of your choice or
the standard application built into your computer's operating
system to transfer or copy your photos to the computer.
• Windows 7/Vista: Your photos can be found under [Canon FS40]* >
[Removable Storage] > [DCIM] > [xxxCANON], where "xxx" is a
folder number between 101 and 998.
• Windows XP: Your photos can be found under [Canon FS40]*.
• Mac OS X: iPhoto will start up automatically and [Canon FS40]* will
appear as a new device.
* The actual name of the device will show your camcorder's model.
IMPORTANT
• When the camcorder is connected to a computer:
- Do not open the memory card slot cover and do not remove the
memory card.
- Do not change or delete any of the camcorder's folders or files
directly from the computer as this may result in permanent data loss.
Always use only the supplied PIXELA's software to save your movies
on the computer.
84
External Connections
in the menu panel to start
to