Canon FS40 Instruction Manual page 79

Flash memory camcorder
Hide thumbs Also See for FS40:
Table of Contents

Advertisement

3 Copy the photos.
FUNC.
[OK]
* If you selected an option other than [This Photo], you can press
the operation while it is in progress.
Options
[All Photos]
[This Photo]
tion frame.
[Selected Photos]
(marked with a
ings from the Index Screen
IMPORTANT
• Observe the following precautions while the ACCESS indicator is on or
flashing. Failing to do so may result in permanent data loss.
- Do not open the memory card slot cover.
- Do not disconnect the power source or turn off the camcorder.
- Do not change the camcorder's operating mode.
• When copying photos onto an Eye-Fi card, photos will be uploaded
automatically if you are within the range of a configured network.
Always verify that Eye-Fi cards have been approved in the country/
region of use. See also
NOTES
• In the following cases, you will not be able to copy recordings to the
memory card:
- If the memory card slot is open.
- If the LOCK switch on the memory card is set to prevent writing.
- If there is no memory card in the memory card slot.
• If there is not enough space on the memory card, as many photos as
possible will be copied before stopping the operation.
[
Copy (
FUNC.
Copies all the photos.
Copies only the photo marked with the orange selec-
Copies all the photos selected in advance
checkmark). Refer to
Using an Eye-Fi card
)]
Desired option
Pre-selecting Record-
(
48).
(
[Yes]*
to interrupt
88).
Photos
79

Advertisement

Table of Contents
loading

This manual is also suitable for:

Fs400

Table of Contents