Dividing Scenes - Canon FS40 Instruction Manual

2 Select ( ,
FUNC.
3 Press
4 Move ( ,
scene and press
The original position of the scene and the current position of the
marker are displayed at the bottom of the screen.
5 Select ( ) [Yes] and press

Dividing Scenes

You can divide scenes (original scenes only) in order to leave out the
best parts and later cut out the rest.
Operating modes:
1 Open the [Movies] index screen.
You can select the original movies in the built-in memory or on
the memory card (
2 Select ( ,
FUNC.
3 Press
• The scene selected will start playing back. Pause the playback at
the point where you want to divide the scene.
• You can use the following icons to bring the scene to a precise
point.
/ : Search (fast playback) backward/forward.
/ : Skip to the beginning/end of the current scene.
: Pause playback.
: Stop playback (cancel).
/ : Frame backward/forward (during playback pause).
• You can also press
division of the scene.
4 Select (
5 Select ( ) [Yes] and press
• A progress bar will be displayed on the screen.
• You can press
6 When the confirmation screen appears, press
) the scene you want to move.
, select [
) the orange marker to the desired position of the
.
45).
) the scene you want to divide.
, select [ Divide] and press
: Resume playback.
FUNC.
) the icon and press
to cancel the operation while it is in progress.
Move] and press
to move the scene.
to stop the playback and cancel the
to divide the scene.
.
.
.
.
Video
69