Stihl FSE 60 Instruction Manual page 18

3
2
3
5
Winding Line onto Spool
: Use green-coded nylon line with a
diameter of 2 mm.
: Cut two 2 m lengths of nylon line
from the reel**.
: Rotate the spool (2) counterclock-
wise until the two arrow points are in
alignment.
: Push the straight end of each line
through the sleeves (5) in the
mowing head (3) until you feel
noticeable resistance – and then
continuing pushing as far as stop.
** see "Special Accessories"
FSE 60, FSE 71, FSE 81
: Hold the mowing head steady.
: Rotate the spool counterclockwise
until the shortest line is about 10 cm
long.
: If necessary, cut the longer line to a
length of about 10 cm.
The mowing head is now full.
STIHL AutoCut 5-2
Always inspect the mowing head for
wear before replacing the nylon line.
If there are signs of serious wear,
replace the parts concerned or
install a new mowing head.
Preparations
: Switch off the motor.
: Lay the trimmer on its back with the
mowing head facing up.
English
17