Mounting the Handles
Assist handle for wood drill
1
2
Before mounting a new wood drill assist
handle for the first time:
:
Hold the handle (1) by the clamp
and turn the grip clockwise until the
gap (2) in the clamp is completely
closed.
This breaks the small plastic retainer in
the clamp and allows the clamp to be
opened up.
BT 45
Normal mounting procedure
:
Hold the clamp firmly and rotate the
grip about 5 full turns counter-
clockwise.
:
Open up the clamp slightly.
:
Push the handle over the chuck until
it butts against the machine. The
clamp must engage the groove on
the gearbox housing.
:
Screw handle into clamp clockwise.
:
Move to required position and
tighten the grip firmly.
Assist handle for planting hole
auger and ice auger
3
3
4
:
Loose the two wing screws (3) on
the flange (4).
:
Make sure the polymer bushing is
correctly seated (see arrow)
English
9