Sagem myC-3 Technical Documentation Manual page 90

myC-3/ myC-3b
4.61 Tools :
- Cross shaped screwdriver
- Soldering iron
- Solder wick
- Flat screwdriver
4.62 Preliminary operation
1. Remove the battery pack (
2. Remove the front flip cover (
4.63 Removal procedure :
1. Unstuck the loudspeaker (1) of the back flip cover (2) with a flat screwdriver
2. Unsolder the loudspeaker (1) on the equipped display (2)
3. Remove the loudspeaker (1)
4.64 Placement procedure :
1. Flux the place of the loudspeaker (1) and solder it on the equipped display (2), respecting the wiring
sense
2. Position the loudspeaker (1) in its housing
4.65 Further operations :
1. Remove the front flip cover (
2. Remove the battery pack (
Ref. SCT U38 SSC DTS 0020 – Index A - May 4, 2004
REMOVING / REPLACING THE LOUSPEAKER
Proc sheet 0 01).
Proc sheet 1 05).
Proc sheet 1 05).
Proc sheet 0 01).
Proc Sheet 2 01
1/2
Page 5-38