Stand Installation - Hyundai H-LCD701 Instruction Manual

Cursor buttons ( /
to navigate in various menus. While playing a
picture file from USB/memory card, press to
rotate the picture.
Installation and connection

Stand installation:

• Release the metal washer on the top of
the bracket but do not separate it from the
bracket.
• Insert the metal washer with the bracket
into a hollow at the back of the unit and move
the bracket up to a suitable height.
• Tighten the front screw up on the bracket
to fix the stand with the unit.
• Control the screen angle with the lateral
screw.
• Screw the stand to the bracket.
Connection of the antenna:
Plug the antenna into the Antenna in slot
situated on the rear panel of the unit.
Connection of earphone:
Connect the headphone to the earphone
jack for private listening. The speakers will not
operate when headphones are connected.
Connection to power source:
Connect one round end of attached AC/DC
adaptor or car adaptor to the power source
input socket and the other end to the wall outlet
at the suitable voltage. When in house, use the
AC/DC adaptor; for car use, connect with the
car adaptor (adaptors included should be only
used). Press POWER/
the unit.
AV input connection
Connect the AV cable as showed in the
picture below. After connection, switch the unit
to the AV mode.
All manuals and user guides at all-guides.com
/ / ): Press
system
AV switch control socket to car backing. When
backing, the unit will automatically switch to AV
mode; so, if a rear view camera is connected
to the unit, the display will show the picture of
behind the vehicle.
button to turn on
to the USB slot of the unit. Then connect a
USB to the other end of the cable. The display
will show a menu of contents, from which you
can select files for playback. To disconnect the
USB, just pull it out from the cable.
Instruction manual
Connect to AV system
video out
Connect to AV system
video out
AV
audio out
audio out
Connect to car
backing camera
Car backing signal connection
Using the control wire included, connect the
USB connection
Connect the included Mini USB-USB cable
5