Table of Contents
Advertisement
(4) Camera signal system adjustment mode
In the camera signal system adjustment mode, the automatic white balance is disabled to allow for the adjustment of the camera
unit. At this time, the white balance mode is fixed at the INDOORS mode and the focus mode is switched to the manual focus mode.
1) Shifting to the camera signal system adjustment mode
Set the data for the address "0000" to "
]
This shifts the camera signal system adjustment mode.
* When this adjustment mode has been shifted to, make the adjustment according to (5) Camera unit adjustment procedure.
2) Shifting to the normal operation mode
Set the data for the address "0000" to "
]
This shifts the mode to the normal operation mode.
]
Press the "CONTINUE" key, and the "CAM ADJ" display goes out of the screen, enabling the normal operation.
(5) Camera unit adjustment procedure
1. Auto focus adjustment
2. Iris basic adjustment
3. Black balance adjustment/A/F noise adjustment
4. Iris AE coarse adjustment
5. White balance coarse adjustment
* The above 1. Auto-focus function adjustment in the auto-focus function adjustment mode, whereas the other adjustments are made
in the camera signal system adjustment mode.
00".
FF".
6. Color gain coarse adjustment
7. White balance adjustment
8. Color gain adjustment
9. Auto white balance adjustment
10. Iris AE adjustment
35
VL-WD250S/H/E
VL-WD450S/H/E
Advertisement
Table of Contents
