Limitations On Use; Installation Types - BOMBAS IDEAL ARS Series User And Maintenance Manual

Bombas Ideal, S.A

LIMITATIONS ON USE

CAUTION
Do not use the pump with liquids at temperatures above 45°C. The density of the liquid to be pumped
may not surpass 1,200 kg/m
the impeller opening.
MINIMUM LIQUID LEVEL: The pump can operate in continuous service at maximum power, always as
long as the stator is submerged halfway.
MAXIMUM IMMERSION DEPTH 20 m.
The electrical pump cannot operate beyond the limits indicated in the characteristic curves detailed in
the catalogue. It is very important to take into account that at heights lower than such characteristics,
the motor may burn out.
NOISE
The pump should emit no noise given that it operates while submerged in the sump.
APPLICATIONS
This pump series is suitable for industrial and civilian waste water, pumping muddy waters, and pumping
faecal waters.

INSTALLATION TYPES:

The available installation types are:
1
1 ARS pump
2 Coupling foot
3 Quick release
4 Guide rail
• 1A WET PIT: The electrical pump is automatically connected to the coupling foot, via two guide rails
that facilitate its descent to the sump.
• 2B TRANSPORTABLE: Prepared for output using a flexible hose, handle and strainer base.
• 3C DRY PIT: An arrangement designed to work out of the water, without being submerged. It can
weather an occasional flood without danger.
3 . The pumped liquid cannot contain particles of a diameter greater than
1 ARS pump
15 Impulsion elbow
16 Strainer base
1 ARS pump
17 Suction support