Before First Use - HOMCOM IM2100-GS Assembly Instruction Manual

Key (with indicator)
ON/OFF
ICE
ICE FULL
ADD WATER

BEFORE FIRST USE

1. Unpack the appliance, then check and make sure that all the accessories including ice
basket and ice scoop etc. are complete. Please contact with the client service department
if some accessories are missed.
2. Please ensure the ice maker is level and on a stable table or platform to avoid
malfunction.
3. The incline angle of the ice maker cabinet should not exceed 45°during transportation
or use. Do not turn the ice maker upside down. Doing so could cause the compressor or
refrigerating system to operate incorrectly. Please allow time for the fluids in the
compressor to settle after the ice maker is moved or transported. Before using the ice
maker for the first time, please wait for 2 hours after the unit has been leveled and
positioned in the proper place.
4. The appliance must be placed on a dry and level surface with sufficient ventilation, far
from heat sources such as ovens, heaters and corrosive gases.Leave about a 6-inch (15cm)
clearance on all sides of the ice maker for proper ventilation.
5. Do not fill the water reservoir with hot water. This may damage the ice maker. It is best
to fill the water reservoir with water of room temperature or lower.
6. Do not use the appliance at a very cold environment (lower than 5℃).
Function
Start or stop the appliance；
Long press for cleaning；
Standby mode: "ICE" indicator blinks;
Cleaning condition："ICE" indicator blinks
quicker；
Working condition: "ICE" indicator lights
solidly.
"ICE FULL" indicator lights up when the
ice basket is full.
"ADD WATER" indicator lights up when
the water reservoir is lack of water.