Table of Contents
Advertisement
9.8.1. Method
Confirm that the power is turned on:
1. Press the "OPEN/CLOSE" button to open/close the tray.
2. Press the "POWER" button to turn on/off the power.
3. Disconnect the power plug from the outlet.
9.8.2. Precautions
When disconnecting the power plug while the tray is still open, close the tray manually.
10. SERVICE PRECAUTIONS
10.1. Recovery after the DVD player is repaired
- When FROM and/or DVD module P.C.B. has been replaced, carry
out the recovering process to optimize the drive.
Playback the recovery disk to process the recovery automatically.
- Recovery disc (Product number: RFKZD03R004)
- Performing recovery
1. Load the recovery disc RFKZD03R004 on to the player and run it.
2. Recovery is performed automatically. When it is finished, a
message appears on the screen.
3. Remove the recovery disc.
4. Turn off the power.
Note:
This unit requires no initialization process carried out after the traditional DVD players were
repaired.
When the recovery measures are taken, the customer setting will return to the factory setting as
same as the procedure described in item of "Initialization" in 9.5. is carried out. Write down the
contents of the setting before recovery processing,and reset the player.
10.2. Firmware version-up of the DVD player
- In order to optimize the drive operation, the firmware of the DVD
player may be renewed to improve the quality including
operationability and playerbility by updating the firmware onto the
substandard disc.
- After version-up, recovery processing is executed automatically.
- Part number of the recovery disc for version-up will be noticed
when it is supplied.
- Updating firmware
1. Load the recovery disc that is supplied to the player and run it.
56
Advertisement
Table of Contents
