Table of Contents
Advertisement
6.5. SERVICE CAUTION-2
6.5.1. CAUTION FOR AUTO TUNING
PROCEDURE
Auto Tuning will start by the following procedure.
1. Connect the DIN-RF Cable.
2. Connect the AC Mains Lead.
3. Turn on the VCR.
Auto Tuning will start.
Auto Tuning search for TV stations from VHS minimum to UHF
maximum and memorizes every tuned program position. Other
program positions are skipped.
Auto Tuning takes five or more minutes to complete its search.
Do not touch the VCR during Auto Tuning.
Auto Tuning will stop halfway, if the VCR is operated or the aerial
lead and/or the mains lead are disconnected.
In case the VCR stopped during Auto Tuning, the VCR has to be
reset and restarted. See the following item 2.
15
Advertisement
Table of Contents
