CARE, MAINTENANCE, & PRECAUTIONS: Quick Start 1) The unit is waterproof only when the cap is properly closed. 2) Close the cap properly before use. If the unit is placed in a water environment without the Connect your subwoofer to a 12VDC cap properly closed, water may enter into the unit and void your warranty.
Page 3
When you install the subwoofer to a ATTENTION: Do NOT dispose of in a landfill. Contact Grace Digital at www.gracesupport.com battery or a voltage regulator on a Yamaha WaveRunner, you or a certified recycling agent to dispose of the unit.
Page 4
FCC STATEMENT: 3. Tighten the bolts on the This device complies with Part 15 of the FCC Rules. Operation is subject to the following battery terminals until the two conditions: connectors are held firmly 1) This device may not cause harmful interference, and in place.
What’s in the Box Connect Power Cable to Power In SAE Connector 15 Amp Blade Fuse The subwoofer has a 15 Amp Blade Fuse in a waterproof Fuse Holder on the SAE connector cable. In the case of a Underseat Bluetooth Subwoofer blown fuse, remove the 15 Amp Blade Fuse from the Fuse Holder.
Control Buttons & Operations Specifications Unit Dimensions Wireless Connection with Marine FX Speakers This Subwoofer is designed to connect with a pair of ECOXGEAR 8.27” Marine FX Speakers, creating a complete audio system. Refer to Wireless Connection with Marine FX Speakers for details. 12.6”...
Waterproof Case RECOMMENDATION: If you are not familiar with Bluetooth pairing for your Smartphone or other Smart Device, refer to the User Guide for your Smartphone to learn how to add and pair a new device (the Underseat Bluetooth Subwoofer, for instance) to your Smartphone using Bluetooth.
Page 8
Wireless Connection with Pair and Connect Subwoofer to Marine FX Speakers your Smart Device Connecting With Bluetooth: Connect To Your Smart Device & Play Audio When your subwoofer is turned on, the Bluetooth icon the LCD Display will flash, indicating that it is ready to pair. Turn on Bluetooth on your Bluetooth device (Smart Device) and set the device in pairing mode.