Cabinet Disassembly Instructions - Philips MAGNAVOX 20MC4304 Service Manual

CABINET DISASSEMBLY INSTRUCTIONS

1. Disassembly Flowchart
This flowchart indicates the disassembly steps for the
cabinet parts, and the CBA in order to gain access to
item(s) to be serviced. When reassembling, follow the
steps in reverse order. Bend, route and dress the
cables as they were.
CAUTION!
When removing the CRT, be sure to discharge the
Anode Lead of the CRT with the CRT Ground Wire
before removing the Anode Cap.
[2] Tray Chassis Unit
[4] DVD
[7] Function CBA
Mechanism
[5] DVD Main
CBA Unit
[6] Sub CBA
2. Disassembly Method
Step/
Loc. Part
Fig.
No.
No.
Rear
[1] D1 4(S-1), (S-2), 2(S-3)
Cabinet
Tray D2
[2] Chassis D3
Unit D5
D3
[3] CRT
D5
D2
DVD
[4] D4
Mechanism
D5
D2
DVD Main
[5] D4
CBA Unit
D5
D2
[6] Sub CBA
D5
Function D2
[7]
CBA D5
Deck D2
[8]
Assembly D5
[1] Rear Cabinet
[3] CRT
[8] Deck Assembly
[9] Main CBA
Removal
Remove/*Unhook/
Unlock/Release/
Unplug/Unclamp/
Desolder
Anode Cap, *CN2501,
CRT CBA, *CN1601,
*CN1802, *CN2571,
*CN2801
4(S-4)
4(S-5), Wire Holder C,
2(S-6), Loader Cover,
*CN201, *CN301
*CN1, *CN2
6(S-7),
Loader PCB Holder,
*CN1301, *CN1602
(S-8), *CN2401
3(S-9), Top Shield,
7(S-10), (S-11),
(S-12),
*CL1201, *CL1401,
*CL1402, *CL403
Step/
Loc. Part
No.
[9] Main CBA
↓ ↓
(1) (2)
Note:
(1) Order of steps in procedure. When reassembling,
follow the steps in reverse order. These numbers
are also used as the Identification (location) No. of
parts in figures.
(2) Parts to be removed or installed.
(3) Fig. No. showing procedure of part location
(4) Identification of parts to be removed, unhooked,
unlocked, released, unplugged, unclamped, or
desoldered.
P = Spring, L = Locking Tab, S = Screw,
CN = Connector
* = Unhook, Unlock, Release, Unplug, or Desolder
e.g. 2(S-2) = two Screws (S-2),
2(L-2) = two Locking Tabs (L-2)
(5) Refer to the following "Reference Notes in the
Table".
Note
---
1
---
2, 3
---
---
---
4
1-6-1
Removal
Remove/*Unhook/
Fig. Unlock/Release/
No. Unplug/Unclamp/
Desolder
D2 5(S-13)
↓ ↓
(3) (4)
Note
---
↓
(5)
T1102DC