Cabinet Disassembly Instructions; Disassembly Flowchart - Philips 32PFL3506/F7 Service Manual

CABINET DISASSEMBLY INSTRUCTIONS

1. Disassembly Flowchart

This flowchart indicates the disassembly steps for the
cabinet parts and the CBA in order to gain access to
items to be serviced. When reassembling, follow the
steps in reverse order. Bend, route and dress the
cables as they were.
[1] Stand
Assembly
[8] IR Sensor
[2] Rear Assembly
CBA
[9] Function
[3] Inverter CBA
CBA
[4] Jack CBA
[5] Power Supply
CBA
[6] Digital Main
CBA Unit
[10] LCD Module
Assembly
[11] Front
Cabinet
2. Disassembly Method
Step/
Fig.
Loc. Part
No.
No.
Stand
[1] D1 3(S-1)
Assembly
Rear 12(S-2), 2(S-3),
[2] D1
Assembly 4(S-4), 11(L-1)
7(S-5), CN1001,
Inverter D2 CN1003, CN1100,
[3]
CBA D4 CN1101, CN1102,
CN1901
D2
[4] Jack CBA 2(S-6), CL701B
D4
Power 9(S-7), CN101,
D2
[5] Supply CN301, CN302,
D4
CBA CN801, CN802
2(S-8), 8(S-9),
Digital Main D2 CN3902
[6]
CBA Unit D4 Jack Holder, Shield
Box
4(S-10),
[7] Speaker D3
Speaker Holder
[7] Speaker
Removal Note
---
---
---
---
---
*1 *2
, CN3005 ,
---
---
4-1
Step/
Fig.
Loc. Part
No.
No.
IR Sensor D3
[8] CL103A
CBA D4
Function D3 Function Knob,
[9]
CBA D4 Knob Frame
LCD
[10] Module D3 (S-11)
Assembly
Front
[11] D3 ---------------
Cabinet
↓ ↓ ↓
(1) (2) (3)
*1: TYPE A
*2: TYPE B
Note:
(1) Order of steps in procedure. When reassembling,
follow the steps in reverse order. These numbers
are also used as the Identification (location) No. of
parts in figures.
(2) Parts to be removed or installed.
(3) Fig. No. showing procedure of part location
(4) Identification of parts to be removed, unhooked,
unlocked, released, unplugged, unclamped, or
desoldered.
P = Spring, L = Locking Tab, S = Screw,
H = Hex Screw, CN = Connector
e.g. 2(S-2) = two Screws of (S-2),
2(L-2) = two Locking Tabs of (L-2)
(5) Refer to the following "Reference Notes in the
Table."
Removal Note
---
---
---
---
↓ ↓
(4) (5)
PL11.0-A_DC