Disassembly Flowchart; Disassembly Method; Cabinet Disassembly Instructions - Philips 14PV135 Service Manual

CABINET DISASSEMBLY INSTRUCTIONS

[ 14PV135/ (01, 07, 58), 14PV235/ (01, 07, 58), 14PV385/ (01, 07, 39) ]
Comparison Chart of Models and Marks
Model
14PV135/07
14PV235/07
14PV385/07
14PV135/01
14PV235/01
14PV385/01
14PV135/58
14PV235/58
14PV385/39

1. Disassembly Flowchart

This flowchart indicates the disassembly steps for the
cabinet parts, and the CBA in order to gain access to
item(s) to be serviced. When reassembling, follow the
steps in reverse order. Bend, route and dress the
cables as they were.
Caution !!
When removing the CRT, be sure to discharge the
Anode Lead of the CRT with the CRT Ground Wire
before removing the Anode Cap.
[2] Power Unit and Tray Chassis Unit
[5] H.V./Power
Supply CBA
[9] Text CBA [ F,G,I,J,L,M ]
Mark
E
F
G
H
I
J
K
L
M
[1] Rear Cabinet
[3] Power Unit
[4] Tray Chassis Unit
[6] Top Cover
[7] Bottom Plate
[8] Deck Unit
[10] Main CBA
[11] CRT

2. Disassembly Method

ID/
LOC. PART
No.
Rear
[1]
Cabinet
Power Unit
and Tray
[2]
Chassis
Unit
[3] Power Unit 3,5
Tray
[4] Chassis
Unit
H.V./Power
[5] Supply
CBA
[6] Top Cover
Bottom
[7]
Plate
[8] Deck Unit
Text CBA --
[9] [ F,G,I,J,L,
M ]
[10] Main CBA
[11] CRT
↓ ↓
(1) (2)
(1): Order of steps in Procedure. When reassembling,
follow the steps in reverse order.These numbers
are also used as the identification (location) No. of
parts in Figures.
(2): Parts to be removed or installed.
(3): Fig. No. showing Procedure of Part Location.
(4): Identification of part to be removed, unhooked,
unlocked, released, unplugged, unclamped, or
desoldered.
S=Screw, P=Spring, L=Locking Tab, CN=Connec-
tor, *=Unhook, Unlock, Release, Unplug, or Desol-
der
2(S-2) = two Screw (S-2)
(5): Refer to the following "Reference Notes in the
Table."
1-5-6
REMOVAL
REMOVE/
*UNHOOK/
Fig.
UNLOCK/RELEASE/
No.
UNPLUG/DESOL-
DER
4(S-1), 2(S-2),
1,2,5
*CN804
Anode Cap, *CN501,
3,4,5 *CN551, *CN601,
CRT CBA
*CN502, *CN552,
*CN602
3 ----------
3 6(S-3)
3 5(S-4), CL604
3 (S-5)
7(S-6), (S-7), (S-8),
Desolder *(CN201,
3, 5
CL401, CL402,
CL403)
(S-9), *CN751,
3, 5
*CN752
3 4(S-10)
4 4(S-11)
↓ ↓
(3) (4)
Note
1
2
3
-
4
5
6
7
8
9
10
↓
(5)
T6450DC