1.1 Introduction
The spec sheets for each generator set provide specific
generator and engine information.
See the generator set specification sheets for generator
ratings and other generator set data not supplied in this
manual.
Consult the generator set nameplate for
specific generator set ratings.
Consult the engine operation manual and engine
service manual for engine specifications.
1.2 Controller Specifications
The generator set is equipped with the ADC 2100. For a
specific description of the controller, see Section 2,
Operation, in the operation manual.
Environmental Specification
Operating temperature
Storage temperature
Humidity
Power requirements:
Voltage
Current
TP-6198 3/15
--20_ to 70_C
(--4_ to 158_F)
--60_ to 70_C
(--76_ to 158_F)
0%--95% condensing
12 VDC
250 mA @ 12 VDC
Section 1 Specifications
1.3 Engine Specifications
Engine Specification
Manufacturer
Model
Cycle
Number of cylinders
Compression ratio
Displacement, L (cu. in.)
Rated power, propane fuel,
kWm (BHP)
Rpm, 60 Hz
Rpm, 50 Hz
Bore x stroke, mm (in.)
Valve (exhaust) material
Cylinder head material
Piston rings
Piston material
Crankshaft material
Main bearings: quantity,
type
Governor
Lubrication system
Oil capacity (w/filter), L (qt.)
Oil capacity with makeup
kit, L (qt.)
Oil pressure, kPa (psi)
Fuel system
LP/natural gas minimum
supply pressure,
2
oz./in.
(in. H
O)
2
Battery voltage
Battery ground
Spark plug gap, mm (in.)
Ignition system
Starter motor
Cooling system
Valve material
Intake
Exhaust
15 kW
30 kW
GM
1.6L OHC
4
4
9.4:1
1.6 (98)
19.0 (25.5)
37.2 (50)
1800
3600
NA
3000
79 x 81.5 (3.11 x 3.21)
High alloy steel
Aluminum
2 compression/1 oil control
High silicon content
aluminum
Cast iron
5, replaceable inserts
Electronic
Full pressure
3.5 (3.7)
5.4 (5.7)
150 (22)
LP gas or natural gas
4--6 (7.11)
12 VDC
Negative
0.8--0.9 (0.031--0.035)
Distributorless electronic
Solenoid-actuated pinion
Water-cooled
Chrome/silicone steel
Stellite F
Section 1 Specifications
13