file:///E:/BT-S1315DA_BT-S1315DAD_BT-S1415DA_BT-S1415DAD/SVC/s0414030000.html
4.14.3 Adjustment Procedure
TOP PREVIOUS NEXT
1. Input a SECAM color bar signal.
2. Connect an oscilloscope to TPB19 (B-Y).
3. Set the monitor to the FACTORY mode, then select PICTURE REF from the menu, and then
adjust SECAM B-Y OUT on the PICTURE REF menu to level the color signal periods with
the H blanking ones.
4. Change the connection of the oscilloscope to TPB20 (R-Y).
5. Adjust SECAM R-Y OUT on the PICTURE REF menu to level the color signal periods with
the H blanking ones.
•@
TOP PREVIOUS NEXT
file:///E:/BT-S1315DA_BT-S1315DAD_BT-S1415DA_BT-S1415DAD/SVC/s0414030000.html [2006-02-04 08:28:55]