Lcd video monitor, high-quality images, advanced functions, low power consumption and excellent cost-performance. an 47 cm (18.5 inches) lcd monitor for diverse broadcasting needs (6 pages)
Page 1
Before attempting to connect, operate or adjust this product, please read these instructions completely. Printed in Thailand VQT9992 Model BT-S950P UNDER PULSE VOLUME PHASE CHROMA BRIGHT CONTRAST SCAN CROSS MONO BLUE LINE A NTSC LINE B 16:9 SYNC V.HOLD NTSC Color Video Monitor S950 POWER LCT1182-001A-H 0302-PN-Y-U-JMT...
FCC INFORMATION (U.S.A. only) CAUTION: Changes or modifications not approved by PANASONIC could void the user’s authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules.
) : Power is turned off and the power indicator goes off. Note: * If the battery expires while the monitor is operated with DC power supply (the voltage level drops), the green indicator changes to orange, then to red. When the POWER indicator changes to red, the power automatically goes off.
<Front Panel> S950 UNDER PULSE VOLUME PHASE CHROMA BRIGHT CONTRAST SCAN CROSS MONO BLUE POWER LINE A NTSC LINE B SYNC 16:9 V.HOLD NTSC 11 UNDER SCAN switch Selects the scanning mode (over scan screen or under scan screen). ) : Over scan screen ) : Under scan screen 12 PULSE CROSS switch Checks the retrace period (sync signal) by delaying the...
CONTROLS AND FEATURES Rear < Rear Panel > WARNING THIS APPARATUS MUST BE EARTHED AC IN DC IN 15 VIDEO A terminals Video signal input (IN) and output (OUT) terminals. The output terminal is bridge-connected. : Video signal input terminal OUT : Bridge-connected video signal output terminal Notes: * For corresponding audio signals, use the AUDIO A...
Page 7
(aspect ratio), Pulse Cross, and Color Off modes can be controlled from an external unit. Note: * When you’re controlling the monitor externally via the TALLY/REMOTE terminal, set all corresponding switches on the front panel to the OFF ( (Whichever switch is pressed first has priority so remote switches may not function if the panel switches are ON ) position.)
* If you're not connecting any equipment to a bridged output (OUT) terminal, be sure not to connect any other cables to the bridged output (OUT) terminal as this will cause the terminating resistance switch to open (auto terminate function). * When making a bridge connection, connect the input (IN) and output (OUT) terminals on the monitor to separate video components.
● You experience a mild electric shock when you touch the picture tube. This phenomenon is due to a normal buildup of static electricity on the CRT and is not harmful. ● The monitor emits a strange sound when the room temperature changes suddenly. This is only a problem if an abnormality appears on the screen as well.
SPECIFICATIONS 7 Type : Color video monitor 7 Color system : NTSC, PAL 7 Picture tube : 9" measured diagonally, flat-square type, 90° deflection, in-line gun, vertical line trio type (phospher stripe pitch 0.5 mm) 7 Effective screen size : Width Height Diagonal 8-3/4"...
Page 11
Dimensions < Front View > 8-3/4 (222) S950 S950 7-1/8 (178)* UNDER PULSE VOLUME PHASE CHROMA BRIGHT CONTRAST SCAN CROSS MONO BLUE POWER LINE A NTSC LINE B SYNC 16:9 V.HOLD NTSC 6-1/2 (164) * Asterisks ( ) are used to indicate front panel dimensions.
Page 12
DIVISION OF MATSUSHITA ELECTRIC CORPORATION OF AMERICA Executive Office: 3330 Cahuenga Blvd W., Los Angeles, CA 90068 (323) 436-3500 EASTERN ZONE: One Panasonic Way 4E-7, Secaucus, NJ 07094 (201) 348-7621 Southeast Region: 1225 Northbrook Parkway, Ste 1-160, Suwanee, GA 30024 (770) 338-6835 Central Region:...