Toshiba RAV-SM182UTP-UL Owner's Manual page 8

Switching between the normal display and detailed display
Push and hold the [ CANCEL] button and [
switch the display mode.
The normal display mode is selected as a factory default setting.
Normal display mode (factory default)
12:00
82
F
Cool
Mode Fan Speed
Detailed display mode
Room A 12:00
75
F
Cool
Mode Fan Speed
13-EN
OM_1115350256-1_EN_FR_ES.indb 7 OM_1115350256-1_EN_FR_ES.indb 7
MONITOR] button at the same time for more than 4 seconds to
(*1)
Energy saving icon
• Displayed when performing the power saving operation of the
air conditioner.
Soft cooling icon
• Shows the air conditioner is performing the soft cooling
operation.
Saving icon
• Displayed when performing operation by suppressing
excessive heating or excessive cooling through automatic
correction of the temperature set point.
(*1)
Icons appear on the screen when the detailed display mode is
selected.
*1 • The " Preparing to heat" icon appears when the heating
operation starts or when defrosting operation.
The indoor fan stops or the operation becomes the blowing
operation when it is displayed.
• It may be displayed depending on the model when
" Preparing to operate" is displayed.
– 7 –
▼ Icon list
Shows the Energy saving operation is
activated.
Shows the remote control sensor is
activated.
(*2)
Shows the Night operation is activated.
Shows the central control device prohibits
the use of the remote control.
Shows the saving operation is activated.
*2 Normally the temperature sensor of the indoor unit senses the temperature. The temperature around the
remote control can also be sensed. For details, contact the dealer where you purchased the air conditioner.
* Do not use the function when the air conditioner is controlled in a group.
▼ Ventilation icon list
Ventilation icons appear on the display only when a ventilation unit is connected.
Automatic mode
Bypass mode
Total heat exchange mode
Shows a timer function is activated.
Shows the Louver lock is activated.
Shows the setting of the louver.
!
Shows the fi lter needs to be cleaned.
Shows soft cooling is activated.
Shows operation switching control is in
progress.
24-hour ventilation mode
Nighttime heat purge mode
14-EN
5/4/2565 BE 09:52 5/4/2565 BE 09:52