Part Names; Wired Remote Controller - Toshiba RAV-SM182UTP-UL Owner's Manual

Hide thumbs Also See for RAV-SM182UTP-UL:
Table of Contents

Advertisement

Available languages

Available languages

2

Part names

Indoor unit (The design varies depending on the indoor unit,
The following illustration show an example.)
Knob
Knob to open/close the
suction port.
Signal
receiving unit
Air fi lter
Removes dust or trash.
(Provided on the suction port.)
Projection
of air fi lter
Outdoor unit (The design varies depending on the outdoor unit.
The following illustration show on example.)
Air intake
(Side and rear)
Fixing leg
11-EN
OM_1115350256-1_EN_FR_ES.indb 6
OM_1115350256-1_EN_FR_ES.indb 6
3
This remote controller can control the operation of up to 8 indoor units.
ground screw
Operate the remote control according to the following procedure
Provided in the electric control box.
when it is used for the fi rst time or when the settings are
changed. Pushing the [
air conditioning unit with the settings made on the remote control
from the next time.
Preparation
Discharge louver
Turn on the circuit breaker.
of discharge port
• ʽʽ Setting'' appears on the display of the remote control when
Change the direction of
the air to be discharged
according to cool mode.
Suction air port
The air in the room is sucked in
from this port.
1
2
Panel
3
There is an ground screw, valves,
and electric parts inside.
Air discharge
4
Piping panel
Wiring hole
Refrigerant pipe outlet
– 6 –

Wired remote controller

Before Use
ON/OFF] button starts running the
the power is turned on.
* When the power is turned on, it takes about 5 minutes
before the remote control becomes openable. This is not a
malfuncation.
Model name label
[
MONITOR] button
Displays the monitoring screen.
[
MENU] button
Displays the menu screen.
[
CANCEL] button
Functions as indicated on the screen, such as
returning to the previous menu screen.
[
] button
During normal operation: adjusts the temperature.
On the menu screen: selects a menu item.
The button LED lights while the air
conditioning unit is running.
Temperature sensor
5
[
] button
During normal operation: adjusts the temperature.
On the menu screen: selects a menu item.
6
[
F1] button
Varies its function according to the setting screen.
7
[
F2] button
Varies its function according to the setting screen.
8
[
ON/OFF] button
5/4/2565 BE 09:52
5/4/2565 BE 09:52
EN
TH
ID
12-EN

Advertisement

Table of Contents
loading

Table of Contents