Makita HR166DZ SDS-PLUS Instruction Manual
Hide thumbs
Also See for HR166DZ SDS-PLUS:
- Instruction manual (85 pages) ,
- Instruction manual (72 pages) ,
- Instruction manual (57 pages)
Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Makita HR166DZ SDS-PLUS
Summary of Contents for Makita HR166DZ SDS-PLUS
- Page 1 INSTRUCTION MANUAL Cordless Driver Drill DF333D DF033D Read before use.
-
Page 2: Specifications
SPECIFICATIONS Model: DF333D DF033D Drilling capacities Steel 10 mm Wood 21 mm Fastening capacities Wood screw 5.1 mm x 63 mm Machine screw No load speed High (2) 0 - 1,700 min Low (1) 0 - 450 min Overall length 179 mm 149 mm Rated voltage... -
Page 3: Ec Declaration Of Conformity
Keep children and bystanders away while Vibration operating a power tool. Distractions can cause you to lose control. The vibration total value (tri-axial vector sum) deter- Electrical safety mined according to EN62841-2-1: Power tool plugs must match the outlet. Never Model DF333D modify the plug in any way. Do not use any Work mode: drilling into metal adapter plugs with earthed (grounded) power Vibration emission (a... - Page 4 If devices are provided for the connection of Use the power tool, accessories and tool bits dust extraction and collection facilities, ensure etc. in accordance with these instructions, tak- these are connected and properly used. Use of ing into account the working conditions and dust collection can reduce dust-related hazards.
-
Page 5: Tips For Maintaining Maximum Battery Life
MISUSE or failure to follow the safety CAUTION: Only use genuine Makita batteries. rules stated in this instruction manual may cause Use of non-genuine Makita batteries, or batteries that serious personal injury. have been altered, may result in the battery bursting causing fires, personal injury and damage. It will Important safety instructions for... -
Page 6: Functional Description
Battery protection system FUNCTIONAL DESCRIPTION The tool is equipped with a battery protection system. This system automatically cuts off power to the motor to extend battery life. CAUTION: The tool will automatically stop during operation if the Always be sure that the tool is tool and/or battery are placed under one of the following switched off and the battery cartridge is removed conditions: before adjusting or checking function on the tool. Overloaded: Installing or removing battery The tool is operated in a manner that causes it to draw an abnormally high current. -
Page 7: Switch Action
Switch action Reversing switch action ► 1 . Switch trigger ► 1 . Reversing switch lever CAUTION: CAUTION: Before installing the battery car- Always check the direction of tridge into the tool, always check to see that the rotation before operation. switch trigger actuates properly and returns to CAUTION: Use the reversing switch only after... -
Page 8: Adjusting The Fastening Torque
Position of Speed Torque Applicable speed operation change lever High Heavy load- ing operation High Light loading operation To change the speed, switch off the tool first. Select the "2" side for high speed or "1" for low speed but high torque. Be sure that the speed change lever is set to the correct position before operation. If the tool speed is coming down extremely during the operation with "2", slide the lever to the "1" and restart the operation. -
Page 9: Installing Hook
To install the driver bit, pull the sleeve in the direction of ASSEMBLY the arrow and insert the driver bit into the sleeve as far as it will go. Then release the sleeve to secure the driver bit. CAUTION: Always be sure that the tool is switched off and the battery cartridge is removed before carrying out any work on the tool. -
Page 10: Screwdriving Operation
Installing driver bit holder Screwdriving operation Optional accessory CAUTION: Adjust the adjusting ring to the proper torque level for your work. CAUTION: Make sure that the driver bit is inserted straight in the screw head, or the screw and/or driver bit may be damaged. Place the point of the driver bit in the screw head and apply pressure to the tool. Start the tool slowly and then increase the speed gradually. Release the switch trigger... -
Page 11: Using Holster
Discoloration, deformation or cracks may result. To maintain product SAFETY and RELIABILITY, repairs, any other maintenance or adjustment should be performed by Makita Authorized or Factory Service Centers, always using Makita replacement parts. OPTIONAL ACCESSORIES CAUTION: These accessories or attachments are recommended for use with your Makita tool spec- ified in this manual. The use of any other accessories or attachments might present a risk of injury to persons. ► 1 . Holster holder 2. Waist belt Only use accessory or attachment for its stated purpose. If you need any assistance for more details regarding these accessories, ask your local Makita Service Center. •... - Page 12 • Holster • Plastic carrying case • Hook • Makita genuine battery and charger NOTE: Some items in the list may be included in the tool package as standard accessories. They may differ from country to country. Makita Europe N.V. Jan-Baptist Vinkstraat 2, 3070 Kortenberg, Belgium Makita Corporation 3-11-8, Sumiyoshi-cho, Anjo, Aichi 446-8502 Japan 885672A226 www.makita.com 20190329...