HP Compaq Presario,Presario 6001 Getting Started page 39

3. Click the Audio tab.
4. Click the option for the number of speakers
that matches your multi-channel speaker
system.
5. Click OK.
If you want to play a stereo DVD, repeat
these steps (1 through 5) and change the
audio properties for WinDVD to match the
DVD output.
Getting Started
To use the microphone with
multi-channel audio:
The multi-channel speaker system connects to the
PC using the Microphone, Audio (Line) In, and
Audio (Line) Out connectors on the back of the PC.
To use the back microphone connector, you must
disconnect your multi-channel speakers system and
select 2 channel audio setup. To change the audio
configuration, see "To configure multi-channel
audio output for speakers configuration:"
on page 3–26.
Using the Computer
3–27