HP Compaq Presario,Presario 6001 Getting Started page 109

WARNING: To reduce the risk of
personal injury from electrical shock
and/or hot surfaces, be sure to
disconnect the power cord from the
wall outlet, and allow the internal
system components to cool before
touching.
5. Disconnect all external devices connected to
the computer.
6. Lay the computer on its side with the access
panel (the side with the pull grip) facing up.
7. Remove the access panel by loosening the
screw(s) 1 that secures the access panel to the
computer chassis. Slide the access panel back
2 about 1 inch (2.5 cm), and then lift it up
and off the unit.
Getting Started
Removing the Computer Access Panel on the
6000 model
WARNING: Beware of sharp edges
inside the chassis.
Upgrading the Computer
8–3