Table of Contents
Advertisement
Factory Reset
Follow the instructions below to reset the factory default values:
•
Press and hold the RESET button.
•
Wait until the red and green LEDs go on simultaneously and the acoustic signal
heard (approx. 15–35 s).
•
Wait until the red LED goes off and the acoustic signal
another 3 s).
•
Wait until the green LED goes off and the red LED goes on again and the acoustic signal
can be heard (approx. for another 3 s).
•
Wait until the red LED goes off and the acoustic signal
another 3 s).
•
Release the RESET button.
Installation manual 2N® IP Audio Kit
can be heard (approx. for
can be heard (approx. for
can be
41 / 57
Advertisement
Table of Contents
