Removing The Computer From The Stand - HP Compaq dx7300 ST Hardware Reference Manual

Removing the Computer from the Stand

When accessing internal components, remove the computer from the stand before removing the
computer cover. To remove the computer from the stand:
1. Remove/disengage any security devices that prohibit opening the computer.
2. Remove all removable media, such as diskettes or compact discs, from the computer.
3. Turn off the computer properly through the operating system, then turn off any external devices.
4. Disconnect the power cord from the power outlet and disconnect any external devices.
CAUTION
board as long as the system is plugged into an active AC outlet. You must disconnect the
power cord to avoid damage to the internal components of the computer.
5. Lift the computer off the stand.
Figure 2-1
NOTE
computer cover and installing hardware.
10 Chapter 2 Hardware Upgrades
Regardless of the power-on state, voltage is always present on the system
Removing the Computer from the Computer Stand
Lay the computer on its side (with the computer cover facing up) before removing the
ENWW