Advertisement
Quick Links
Kit Instructions
ProGuard+
For the protection of Graco electrical equipment against voltage fluctuations.
Model 24W090, 24W755
24W755, 230V IEC-320
24W090, 230V CEE 7/7 (Shuko)
Important Safety Instructions
Read all warnings and instructions in this manual.
Be familiar with the controls and the proper usage of the equipment.
Save these instructions.
Patent pending
™
334371A
EN
ti24425a
Advertisement
Related Manuals for Graco ProGuard+
Summary of Contents for Graco ProGuard+
- Page 1 Kit Instructions 334371A ProGuard+ ™ For the protection of Graco electrical equipment against voltage fluctuations. Model 24W090, 24W755 24W755, 230V IEC-320 24W090, 230V CEE 7/7 (Shuko) Important Safety Instructions Read all warnings and instructions in this manual. Be familiar with the controls and the proper usage of the equipment.
-
Page 2: Electric Shock Hazard
Warnings Warnings The following warnings are for the setup, use, grounding, maintenance, and repair of this equipment. The exclamation point symbol alerts you to a general warning and the hazard symbols refer to procedure-specific risks. When these symbols appear in the body of this manual or on warning labels, refer back to these Warnings. - Page 3 ProGuard+ is an electrically operated protective device that monitors the supply voltage to Graco electrical equipment. If there are excessive voltage fluctuations (high or low) ProGuard+ disconnects the equipment from the power source to reduce the risk of damage to the equipment.
- Page 4 Description When the LED blinks red the ProGuard+ has sensed a high or low voltage condition and has disconnected power to the equipment. • Wait a minimum of two minutes to see if acceptable power has been restored and the LED turns green.
-
Page 5: Technical Specifications
Technical Specifications Technical Specifications ProGuard+ Nominal voltage 230VAC, 50/60Hz Current Rating 10Amps High Voltage Disconnect 280VAC Low Voltage Disconnect 170VAC Reset Time 60 seconds Weight 400g (0.9 lbs.) Dimensions 150 x 50 x 45 mm (6.0 x 2.0 x 1.75 in.) Operating temperature range –34°... -
Page 6: Graco Standard Warranty
Graco’s written recommendations. This warranty does not cover, and Graco shall not be liable for general wear and tear, or any malfunction, damage or wear caused by faulty installation, misapplication, abrasion, corrosion, inadequate or improper maintenance, negligence, accident, tampering, or substitution of non-Graco component parts. -
Page 7: Graco Information
Graco Standard Warranty Graco Information For the latest information about Graco products, visit www.graco.com. For patent information, see www.graco.com/patents. TO PLACE AN ORDER, contact your Graco distributor or call 1-800-690-2894 to identify the nearest distributor. 334371A... - Page 8 Original instructions. This manual contains English. MM 334371 Graco Headquarters: Minneapolis International Offices: Belgium, China, Japan, Korea GRACO INC. AND SUBSIDIARIES • P.O. BOX 1441 • MINNEAPOLIS MN 55440-1441 • USA Copyright 2014, Graco Inc. All Graco manufacturing locations are registered to ISO 9001. www.graco.com...