Repair Instruction
8.4. Perform Self-Check mode Process Flow Chart
Entered
Self-Check mode
Refer TS tip #1
Refer TS tip #4
Press Rinse button
•
Buzzer turns on
•
Rinse LED fast blinks
Check Buzzer
Refer TS tip #5
System activities
Technician actions
Troubleshooting tips to refer
Turn On:
•
ECO LED (green)
•
Rinse LED (orange)
•
Iron LED (blue)
Check LEDs
Check power meter:
2000 ˜ 2400W
Press ECO button
•
Rinse LED stops blinking and
remains On
•
* If turbo mode is available:
Power LED (blue) turns off &
Turbo LED (white) turns on
Check LEDs
Refer TS tip #6
Check pump
and LEDs
Power LED (blue), ECO
LED (green) & Rinse LED
(orange) fast blink
NOK
Check zero-crossing
detection circuit
•
ECO LED (green) fast blink
•
Turn on Iron heater for 2
sec if iron is cold
ECO LED stops blinking
and remains on
Tilt iron to vertical
position with tip up
Iron LED (blue)
fast blinks
•
Iron LED remains On
•
Pump turns on
Release steam trigger
•
Pump stops
•
ECO LED (green) and
Rinse LED (red) fast blink
alternately
Self-Check mode
is completed
successfully
GC7011 - GC7040
Refer TS tip #2
OK
Power LED (blue)
fast blinks
Press Power button
Power LED stops blinking
and remains on
OK
Check iron temperature
sensing circuit
Power LED (blue), ECO LED
(green) & Rinse LED (orange)
scrolling anti-clockwise
Refer TS tip #3
Refer TS tip #7
Check Iron LED
Press steam
trigger & hold
trigger and pump
Refer TS tip #8
NOK
Check steam
15-18