HP Compaq dx2000 MT Supplementary Manual page 6

Computer Setup (F10) Utility
Ä
2
3. A choice of ten headings appears in the Computer Setup Utilities
menu.
4. Use the arrow (left and right) keys to select the appropriate
heading. Use the arrow (up and down) keys to select the option
you want, then press the Enter key. To return to the Computer
Setup Utilities menu, press the Esc key.
5. To apply and save changes, select Save Settings and Exit.
❏
If you have made changes that you do not want applied,
select Exit Without Saving.
❏
To reset to factory settings, select Load Default Settings. This
option will restore the original factory system defaults.
CAUTION: Do NOT turn the computer power OFF while the ROM is
saving your F10 Computer Setup changes because the CMOS could
become corrupted. It is safe to turn off power to the computer after you
exit the F10 Setup screen.
Computer Setup Utility Guide