Advertisement
6
Start Design Studio
See the Design Studio Getting Started Guide for detailed information on installing and starting Design
Studio, as well as an overview of the product and a tutorial. For detailed information on using Design
Studio to create, preview, and publish transformation rules, see the Design Studio User Guide. That
information is also available from the Design Studio Help menu.
Requirements
To start Design Studio, you need the following login information from the administrator who sets up
the CTE:
• Your Design Studio username and password
• The IP address of the CTE
• The server upload port number
• HTTP and HTTPS proxy hosts and ports, if Design Studio and the CTE are connected through a
proxy server
Procedure
To start Design Studio, perform these steps:
Step 1
From the Windows Start menu, choose Program Files > Cisco > CTE > Design Studio.
The login dialog box appears.
Step 2
Enter your username and password.
Step 3
Enter the IP address of the CTE.
Step 4
If necessary, change the upload port number.
The default upload port number is 9001. You might need to change the port number if your
firewall redirects ports. Contact your CTE administrator if you do not know which port to
use.
8
Advertisement
