Removing Front Drive Bezels; 5.25" Drive Bezel Blank - HP Compaq dx2000 MT Hardware Reference Manual

Removing Front Drive Bezels

5.25" Drive Bezel Blank

Hardware Reference Guide
1. Turn off the computer properly through the operating system and
turn off any external devices.
2. Disconnect the power cord from the power outlet and the
computer, and disconnect any external devices.
3. Remove the access panel.
4. Remove the front bezel.
Press one of the retaining tabs on the inside of the large bezel towards
the outer edge of the bezel to release the bezel blank. At the same
time, pull the bezel blank inwards to remove it from the main bezel.
Removing the Bezel Blank
To install a bezel blank, reverse the removal procedure.
Hardware Upgrades
1–5