Removing Or Installing An Expansion Card - HP Compaq dc7700 MT Hardware Reference Manual

Removing or Installing an Expansion Card

The computer has two standard full-height PCI expansion slots that can accommodate an expansion
card up to 34 cm (13.4 inches) in length. The computer also has one PCI Express x1 expansion slot
and one PCI Express x16 expansion slot.
Figure 2-9
Item Description
1 PCI expansion slot
2 PCI expansion slot
3 PCI Express x1 expansion slot
4 PCI Express x16 expansion slot
NOTE
board for a total of four PCI expansion slots.
You can install a PCI Express x1, x4, x8, or x16 expansion card in the PCI Express x16 expansion
slot.
To remove, replace, or add an expansion card:
1. Remove/disengage any security devices that prohibit opening the computer.
2. Remove all removable media, such as diskettes or compact discs, from the computer.
3. Turn off the computer properly through the operating system, then turn off any external devices.
4. Disconnect the power cord from the power outlet and disconnect any external devices.
ENWW
Expansion Slot Locations
Some models include an optional PCI extender that adds two PCI expansion slots to the
Removing or Installing an Expansion Card 21