Silvercrest SSSE 300 A1 Operating Instructions Manual page 24

WARNING – RISK OF INJURY!
Provide a stable location for the appliance .
►
Use only accessories recommended by the manufacturer .
►
Never press foodstuffs into the feed tube with your bare
►
hands . Always use the pusher .
Do not put any kitchen utensils or other things into the rotating
►
inserts!
Do not touch any rotating parts .
►
Keep hair, loose clothing and all body parts away from
►
moving parts of the appliance during operation .
After use or before replacing accessories, switch the appli-
►
ance off and remove the mains plug . Do not dismantle the
appliance until the motor has come to a complete standstill .
CAUTION – PROPERTY DAMAGE!
Do not process meat or hard foods with this appliance .
►
Never fill the appliance with hot liquids! Otherwise the appli-
►
ance could be damaged .
Do not operate the appliance with an empty feed tube, as
►
this may cause the motor to overheat and become damaged .
Stop the cutting process immediately if the cutting insert does
►
not rotate or rotates only with difficulty . Disconnect the mains
plug and check whether there is an obstacle in the feed
tube . Also check that the appliance is correctly assembled .
The appliance is designed for a maximum operating time of
►
100 seconds (CO time) without interruption . Afterwards, the
appliance must be switched off until the motor has cooled
down .
Do not use an external timer switch or a separate remote
►
control system to operate the appliance .
Do not use abrasive, aggressive or chemical cleaning
►
agents . They could irreparably damage the surface .
SSSE 300 A1 GB │ IE │ 21 ■