Table of Contents
Advertisement
SE ERROR MESSAGE
When the display shows "SE" this means that the heating element needs
to be replaced. The heating element could be worn out or cracked.
Note: If you run the soldering iron in the 600°F ~ 650°F / 315°C ~ 343°C
range, which is the normal temperature range for most all soldering
applications, the heating element should last for 6 to 12 months
depending on hours of use.
F-1/F-2 ERROR MESSAGE
When the display shows "F-1" or "F-2" this indicates that the fan has
stopped working on the hot air gun and the power supply needs to be
checked.
- 9 -
Advertisement
Table of Contents
