Advertisement
Quick Links
Advertisement
Related Manuals for X-Tronic Platinum Edition 2000-XTS
Summary of Contents for X-Tronic Platinum Edition 2000-XTS
- Page 1 Instructions & Tips...
-
Page 2: Specifications
PLEASE READ THIS MANUAL BEFORE USING YOUR NEW X-Tronic® Model #2000-XTS “Platinum Edition” Ultrasonic Cleaner Thank you for purchasing our new X-Tronic® Model #2000 Platinum Edition 2.0 Liter Ultrasonic Cleaner. This new model is one of the most Technologically Advanced Ultrasonic Cleaners on the USA Market Today featuring Frequency Sweeping &... - Page 3 CONTROL PANEL FUNCTION DIAGRAM LED Timer Readout Ultrasonic Indication Lamp(indicates On when lit) Sweep Function Key (On/Off) (indicates On when lit) Degassing Function Key (On/Off) (indicates On when lit) Ultrasonic Function Key (On/Off) (indicates On when lit) Cleaning Time Set Knob (5 Minute Increments & Full On (∞)) Ultrasonic Cleaner Main On/Off Switch (indicates On when lit) LED Temperature Display Heating Indication Lamp (indicates On when lit) 10.
- Page 4 SHORT HISTORY & OVERVIEW OF ULTRASONIC CLEANERS Ultrasonic cleaning was first introduced to commercial/industrial business in the early 1950’s and became commonplace as relatively inexpensive home appliances in the 1970’s. Ultrasonic cleaning is a process based on a Cavitation Effect caused by high frequency ultrasonic waves that vibrate millions of tiny bubbles to agitate the liquid in order to clean contamination and dislodge small particles of dust/dirt/oil/ etc.
- Page 5 SWEEPING FUNCTION Sweep Technology is featured in all of our X-Tronic Ultrasonic Cleaners. An ultrasonic cleaner with a Sweeping Function uses multiple ultrasonic frequencies in one tank no matter how many transducers are built into the unit. In ultrasonic cleaning, sweeping is defined as a purposeful deviation from the center frequency during operation as a function of time.
- Page 6 PROCEDURE FOR PREPARING YOUR ULTRASONIC CLEANER FOR CLEANING 1. Plug the unit into a grounded outlet. 2. Fill the tank with water up to (or a little over) the fill mark on the inside of the tank. Do not fill with water more than 1/2 inch from the top rim of the tank. 3.
-
Page 7: Special Instructions
PROCEDURE TO ULTRASONICALLY CLEAN YOUR OBJECT 1. Turn the unit Off for 1 Second and back on to reset the Temperature & Time to 0. 2. Turn the Time Set Knob to the desired amount of minutes you would like for cleaning your object(s). - Page 8 7. Electrical repair or any other type of major service must be done by X-Tronic International, Inc. Proof of purchase must be provided by consumer prior to any repair/service acceptance. The seller will use only factory original parts and accessories.
- Page 9 8. DO NOT PULL THE POWER CORD TO UNPLUG. Unplug by the plug end. DO NOT use extension cords with this appliance. 9. Be sure the main unit is stable during use. All four feet should be secure on a level surface. Do not move the unit when it is powered on. DO NOT OPERATE ON FLAMMABLE SURFACES SUCH AS CARPET, A TOWEL, OR OTHER FLAMMABLE PRODUCTS.
-
Page 10: Year Warranty
All X-Tronic Products come with 3-Year Guarantee, valid only in the 48 Contiguous United States. If you purchase this product and ship it to a destination outside of the 48 Contiguous United States this warranty ... - Page 11 - 11 -...
- Page 12 Compliments please call or email us. Toll Free: 844-861-4762 Info@XTronicUSA.com Our Business Hours are: Monday - Thursday: 8am - 4pm CST Friday: 8am - Noon CST If you would like to shop for other X-Tronic International Products Please visit our website www.XTronicUSA.com...