Table of Contents
Advertisement
MAINTENANCE
PERIODIC MAINTENANCE
Daily maintenance is important to keep the tool in good working condition. Keep the tool head portion
1.
clean and free from debris. Excessive dirt and grit can contribute to the premature wear of the tool's
internal mechanical parts.
Check the indenters for wear and damage such as cracks, gouges, or chips. Inspect the tool for
damage or oil leaks.
contacting Panduit Tool Service at 1-888-506-5400, extension 3255.
Fully retract the ram and store the tool in its clean, dry carrying case when not in use.
Avoid humidity wherever possible for efficient operation and the prevention of corrosion.
2.
The hydraulic tool has been calibrated and sealed at the factory. Contact Panduit Tool Service if
3.
hydraulic problems are experienced. It is recommended that the hydraulic fluid be changed every 24
months. The tool should be returned to Panduit Tool Solutions Division for proper oil changing.
CLEANING AND LUBRICATION OF TOOL HEAD
Thorough cleaning and lubrication of the tool head is recommended annually, depending on usage. It is
recommended that the CT-980 Tool be returned to Panduit Tool Solutions Division for proper maintenance by
our trained service staff.
VISUAL INSPECTION
1.
Visually inspect tool for cracks or damage that may affect tool performance.
2.
Visually inspect indenters for cracks, chips or damaged surfaces.
3.
Visually inspect tool for loose or missing components and evidence of loss of hydraulic fluid.
4.
If tool is damaged, or if parts are missing, contact Panduit Tool Solutions Division.
FORCE INSPECTION / CALIBRATION
The tool output force can be certified by using a Panduit Compression Gauge, CG-980 (purchased
separately), or return tool to Panduit Tool Solutions Division for maintenance and calibration.
For further information or assistance, call Panduit Tool Solutions Division at: 888-506-5400, ext. 3255; and
ask for one of our Tool Service Technicians.
CT-980: PA25182A01_01
CT-980
Wipe the tool surfaces with a damp cloth and mild detergent.
Return a damaged tool to Panduit Tool Solutions Division for repair by
Page: 7 of 7
12-2011
Advertisement
Table of Contents
