Table of Contents
Advertisement
MAINTENANCE
It is recommended that the hydraulic fluid be changed every 24 months. The tool should be returned
to Panduit Tool Solutions Division for proper oil changing.
PERIODIC MAINTENANCE
1.
Daily maintenance is important to keep the tool in good working condition. Keep the head clean
and free of debris. Excessive dirt and grit can contribute to the premature wear of the tool's
mechanical parts. \
2.
Particular attention should be made in keeping the tool head openings free of foreign matter and
debris. When using the tool regularly, check that no foreign matter or debris exists in the open
areas between the ram and tool head. Thoroughly clean and lubricate the tool head. A tool that
is dirty with excessive foreign matter may jam and become damaged during operation.
3.
The hydraulic system has been calibrated and sealed at the factory. Consult our Tool Solutions
Division Service Department if hydraulic problems are experienced.
CT-930: PA25202A01_01
CT-930
Fig. 2
CT-930 Tool
Page: 6 of 7
5-2012
- Quick Links:
- Tool Operation
Hide quick links:
Advertisement
Table of Contents
