Page 2
PRE-ASSEMBLY PREPARATION Before you start: 1. Choose a clean, level, spacious assembly area. Avoid hard surfaces that may damage the product 2. Take care when lifting. Product should be assembled as near as possible to the point of use 3. Ensure that you have all required contents for complete assembly 4.
Page 4
SETP 1: • Prepare a protected surface with a blanket or cardboard. • Attach the castors(E) to the base(D). As shown below. • Insert Gas lift(C) into the base(D), press down firmly. Check that the gas lift is properly in, lift the gas lift and make sure the base goes up with it.
Page 5
STEP 2: • Attach the seat(A) to the gas lift, as shown below. • Press down firmly. Check that the gas lift is properly in, lift the seat and make sure the gas lift goes up with it. Tilt Dial The tilt dial can be adjusted to limit the amount the can tilt.
Need help?
Do you have a question about the SIOBHAN 69397 and is the answer not in the manual?
Questions and answers