Page 1
ASSEMBLY INSTRUCTION CLAUDE 5 DRAWER TALL CHEST ITEM CODE 69381 Imported by JWA Furniture Pty Ltd, Qld, Brisbane Australia. For any assistance with assembly or for missing parts please refer to your receipt...
PRE-ASSEMBLY PREPARATION Before you start: 1.Choose a clean, level, spacious assembly area. Avoid hard surfaces that may damage the product 2.Take care when li�ing. Product should be assembled as near as possible to the point of 3.Ensure that you have all required contents for complete assembly 4.Always read the assembly instruc�ons carefully before beginning assembly.
Page 5
PARTS LIST ITEM QTY NO. ITEM TOP PANEL 1 PC 2 PCE DRAWER BACK PANEL 1 PC LEFT SIDE PANEL 5 PCE DRAWER LEFT SIDE PANEL 2 PCE 1 PC RIGHT SIDE PANEL DRAWER BOTTOM PANEL 1 PC 5 PCE UPRIGHT PANEL DRAWER RIGHT SIDE PANEL 1 PC...
Page 16
SAFETY BRACKETS INSTRUCTIONS 1. Attach one Mounting Plate to the wall with the Large Screws. Make sure to attach the Mounting Plate into a stud. If mounting into brick or masonry you will need to acquire wall anchors. 2. Attach the second Mounting Plate to the furniture frame with the Short Screws.
Page 17
To protect your furniture, we suggest the following: • Avoid placing your furniture in direct sunlight. • Do not place furniture directly under windows. • Do not place sharp materials (knife, fork, etc.) directly onto your furniture as sharp material may scrape and damage the finish.
Need help?
Do you have a question about the CLAUDE 69381 and is the answer not in the manual?
Questions and answers