Related Manuals for QNAP TL-R1220Sep-RP
Summary of Contents for QNAP TL-R1220Sep-RP
- Page 1 JBOD Enclosure TL-R1220Sep-RP TL-R1620Sep-RP User Guide Document Version: 1 25/11/2020...
-
Page 2: Table Of Contents
4. Basic Operations Power Button.............................. 27 LEDs................................28 Audio Alert..............................29 5. Troubleshooting Forcing Storage & Snapshots or QNAP JBOD Manager to Recognize the JBOD Enclosure....30 Hot-swapping Failed Drives........................30 Support and Other Resources........................31 6. Glossary QNAP JBOD Manager..........................32 QTS................................32... - Page 3 CE Notice..............................41 FCC Notice..............................41 VCCI Notice..............................41 BSMI Notice..............................42 SJ/T 11364-2006............................42...
-
Page 4: Preface
QNAP JBOD Enclosure - TL-R1220Sep-RP/TL-R1620Sep-RP User Guide 1. Preface About This Guide This guide provides information on the QNAP TL-R1220Sep-RP and TL-R1620Sep-RP SAS JBOD enclosures and step-by-step instructions on installing the hardware. It also provides instructions on basic operations and troubleshooting information. -
Page 5: Product Overview
This chapter provides basic information about the QNAP JBOD Expansion Unit JBOD enclosure. About QNAP JBOD Enclosures QNAP JBOD enclosures are designed to increase the capacity and utility of your NAS or computer, providing a wide range of storage applications. You can manage installed drives independently or configure them as software RAID groups using the host device. -
Page 6: Package Contents
2 x 80 mm, 12V DC fan 3 x 80 mm, 12V DC fan Operating temperature • Non-condensing relative humidity: 5% to 95% • Wet-bulb temperature: 27˚C (80.6˚F) For the list of compatible drive models, go to https://www.qnap.com/compatibility. Package Contents Item Quantity JBOD enclosure... -
Page 7: Front Panel
QNAP JBOD Enclosure - TL-R1220Sep-RP/TL-R1620Sep-RP User Guide Front Panel TL-R1220Sep-RP TL-R1620Sep-RP Component Component Drive LEDs Link LED Power button Fan error LED Status LED Product Overview... -
Page 8: Rear Panel
QNAP JBOD Enclosure - TL-R1220Sep-RP/TL-R1620Sep-RP User Guide Rear Panel TL-R1220Sep-RP TL-R1620Sep-RP Component Component SAS access LED SFF-8644 ports Product Overview... -
Page 9: Drive Numbering
QNAP JBOD Enclosure - TL-R1220Sep-RP/TL-R1620Sep-RP User Guide Component Component SAS link LED Enclosure ID Note When the JBOD connects to the OS, the device assigns the JBOD a number. After 9, the number becomes assigned a letter in alphabetical order: A, b, c, d, E, F, Power port 1 3.5 mm line-out jack... -
Page 10: Safety Information
QNAP JBOD Enclosure - TL-R1220Sep-RP/TL-R1620Sep-RP User Guide TL-R1620Sep-RP Safety Information The following instructions help ensure personal safety and environmental safety. Read these instructions carefully before performing any operations. General Instructions • The device should be stored in a secure location with restricted access, controlled through the use of a tool, lock and key, or any means of security. -
Page 11: Installation Requirements
QNAP JBOD Enclosure - TL-R1220Sep-RP/TL-R1620Sep-RP User Guide • Dispose of used batteries properly according to local regulations or the instructions of the battery manufacturer. Moving Parts • Moving fan blades: Keep your body parts away from moving fan blades while the device is connected to a power source. -
Page 12: Setting Up The Jbod Enclosure
QNAP JBOD Enclosure - TL-R1220Sep-RP/TL-R1620Sep-RP User Guide Category Item Hardware and peripherals • NAS or computer • Storage drives For the list of compatible drive models, go to https:// www.qnap.com/compatibility. • One or more SF-8644 connector cables • Host bus adapter... -
Page 13: Hardware Installation
This section provides information on installing drives, connecting the JBOD enclosure to a NAS or a server, network configurations, and hot-swapping redundant power supply units. Installing Drives QNAP JBOD enclosures are compatible with 3.5-inch hard drives, 2.5-inch hard drives, and 2.5-inch solid- state drives. Installing 3.5-inch Hard Drives on 3.5-inch Trays Warning •... - Page 14 QNAP JBOD Enclosure - TL-R1220Sep-RP/TL-R1620Sep-RP User Guide 3. Install a drive on the tray. a. Place the drive on the tray so that the holes on the bottom of the drive are aligned with the holes on the bottom of the tray.
-
Page 15: Installing 2.5-Inch Hard Drives Or Solid-State Drives On 3.5-Inch Trays
QNAP JBOD Enclosure - TL-R1220Sep-RP/TL-R1620Sep-RP User Guide 5. Power on the JBOD enclosure. Note The JBOD enclosure may take up to 30 seconds to detect the new device. Installing 2.5-inch Hard Drives or Solid-State Drives on 3.5-inch Trays Warning •... - Page 16 QNAP JBOD Enclosure - TL-R1220Sep-RP/TL-R1620Sep-RP User Guide 3. Install a drive on the tray. a. Place the drive on the tray so that the holes on the bottom of the drive are aligned with the holes on the bottom of the tray.
-
Page 17: Connecting The Jbod Enclosure To A Nas
• The recommended maximum length of the SFF cable is 1 meter. Using a longer cable may degrade the signal or performance. Important The QNAP QXP-820S-B3408, QXP-1620S-B3616W, and SAS-12G2E host bus adapters are required for connecting the JBOD enclosure to a host device. Hardware Installation... - Page 18 QNAP JBOD Enclosure - TL-R1220Sep-RP/TL-R1620Sep-RP User Guide TL-R1220Sep-RP TL-R1620Sep-RP 4. Power on the JBOD enclosures. 5. Power on the NAS. 6. Verify that the JBOD enclosures are recognized by the NAS. a. Log on to QTS as administrator. b. Go to Main Menu > Storage & Snapshots > Overview > Storage .
-
Page 19: Connecting The Jbod Enclosure To A Server
Important The QNAP QXP-820S-B3408, QXP-1620S-B3616W, and SAS-12G2E host bus adapters are required for connecting the JBOD enclosure to a host device. Note Third-party host bus adapters are compatible with QNAP JBOD enclosures. For details, go to https://www.qnap.com/en/compatibility/. TL-R1220Sep-RP Hardware Installation... -
Page 20: Network Configuration
4. Power on the JBOD enclosures. 5. Power on the server. 6. Verify that the JBOD enclosure is recognized by the server. a. Go to your server's disk management utility or open QNAP External RAID Manager in Windows or Linux. Note To download QNAP JBOD Manager, go to https://download.qnap.com. - Page 21 QNAP JBOD Enclosure - TL-R1220Sep-RP/TL-R1620Sep-RP User Guide Hardware Installation...
-
Page 22: Network Configuration For Link Aggregation Control Protocol
QNAP JBOD Enclosure - TL-R1220Sep-RP/TL-R1620Sep-RP User Guide Network Configuration for Link Aggregation Control Protocol Link Aggregation Control Protocol (LACP) is a fault-tolerance technique where several physical ports are combined together to form a single channel. Using link aggregation provides fast and transparent recovery if one port fails as all I/O traffic continues to operate until all physical ports fail. - Page 23 QNAP JBOD Enclosure - TL-R1220Sep-RP/TL-R1620Sep-RP User Guide Hardware Installation...
-
Page 24: Network Configuration For Multipath I/O And Link Aggregation Control Protocol
QNAP JBOD Enclosure - TL-R1220Sep-RP/TL-R1620Sep-RP User Guide Network Configuration for Multipath I/O and Link Aggregation Control Protocol Multipath I/O and link aggregation are two different technologies that complement each other. They can be deployed together to achieve the combined benefits of network availability and network performance. -
Page 25: Hot-Swapping Redundant Power Supply Units
QNAP JBOD Enclosure - TL-R1220Sep-RP/TL-R1620Sep-RP User Guide Hot-Swapping Redundant Power Supply Units Warning The NAS may have one or more power supply unit (PSU) cords. To avoid serious injuries, a trained service technician must disconnect all PSU cords before installing or replacing system components. - Page 26 QNAP JBOD Enclosure - TL-R1220Sep-RP/TL-R1620Sep-RP User Guide 4. Insert the new PSU. 5. Connect the power cord to the PSU and the electrical outlet. 6. Power on the JBOD. 7. Enable alerts for PSU failures. a. Log on to QTS as administrator.
-
Page 27: Rail Kits
QNAP JBOD Enclosure - TL-R1220Sep-RP/TL-R1620Sep-RP User Guide Rail Kits Rail kits are not included with the device and must be purchased separately. For details, contact an authorized reseller or go to http://shop.qnap.com. Model Compatible Rail Kit TL-R1220Sep-RP RAIL-B02 TL-R1620Sep-RP You can find installation information in the rail kit package. -
Page 28: Basic Operations
QNAP JBOD Enclosure - TL-R1220Sep-RP/TL-R1620Sep-RP User Guide 4. Basic Operations This chapter describes basic operations of the JBOD enclosure. Power Button Operation User Action Result Power on Press the button once. The device powers on. Power off Press and hold the button for 1.5 The device powers off. -
Page 29: Leds
QNAP JBOD Enclosure - TL-R1220Sep-RP/TL-R1620Sep-RP User Guide LEDs Status Description System Status Flashes green and red alternately every • The drive is being formatted. 0.5 seconds • The JBOD is being initialized. • The operating system is being updated. • RAID rebuilding is in progress. -
Page 30: Audio Alert
QNAP JBOD Enclosure - TL-R1220Sep-RP/TL-R1620Sep-RP User Guide Status Description Drive Green • The JBOD enclosure is powered on. • The drive can be accessed. Flashes green The drive is being accessed. A drive read/write error occurred. Flashes red 5 times per second The drive is being located in the operating system. -
Page 31: Troubleshooting
Forcing Storage & Snapshots or QNAP JBOD Manager to Recognize the JBOD Enclosure If Storage & Snapshots or QNAP JBOD Manager is unable to locate the JBOD enclosure during operation, the drives or data may be faulty. 1. Power off the JBOD enclosure. -
Page 32: Support And Other Resources
QNAP JBOD Enclosure - TL-R1220Sep-RP/TL-R1620Sep-RP User Guide 11. Go to Main Menu > Storage & Snapshots > Storage > Storage/Snapshots . 12. Locate the volume that contains the new drive and then verify that the status is Rebuilding. Support and Other Resources... -
Page 33: Glossary
Software utility for Windows, Linux, and macOS that allows you to view and configure QNAP JBOD enclosures QNAP NAS operating system QuTS hero QNAP NAS operating system featuring ZFS file system Storage & Snapshots QTS utility that allows you to view and configure QNAP JBOD enclosures connected to a QNAP NAS Glossary... -
Page 34: Notices
No license, express or implied, by estoppels or otherwise, to any intellectual property rights is granted by this document. Except as provided in QNAP's terms and conditions of sale for such products, QNAP assumes no liability whatsoever, and QNAP disclaims any express or implied warranty, relating to sale and/or use of QNAP products including liability or warranties relating to fitness for a particular purpose, merchantability, or infringement of any patent, copyright or other intellectual property right. - Page 35 QNAP JBOD Enclosure - TL-R1220Sep-RP/TL-R1620Sep-RP User Guide Free Software Foundation, use the GNU General Public License for most of our software; it applies also to any other work released this way by its authors. You can apply it to your programs, too.
- Page 36 QNAP JBOD Enclosure - TL-R1220Sep-RP/TL-R1620Sep-RP User Guide tells the user that there is no warranty for the work (except to the extent that warranties are provided), that licensees may convey the work under this License, and how to view a copy of this License. If the interface presents a list of user commands or options, such as a menu, a prominent item in the list meets this criterion.
- Page 37 QNAP JBOD Enclosure - TL-R1220Sep-RP/TL-R1620Sep-RP User Guide You may convey verbatim copies of the Program's source code as you receive it, in any medium, provided that you conspicuously and appropriately publish on each copy an appropriate copyright notice; keep intact all notices stating that this License and any non-permissive terms added in accord with section 7 apply to the code;...
- Page 38 QNAP JBOD Enclosure - TL-R1220Sep-RP/TL-R1620Sep-RP User Guide the object code. If the place to copy the object code is a network server, the Corresponding Source may be on a different server (operated by you or a third party) that supports equivalent copying facilities, provided you maintain clear directions next to the object code saying where to find the Corresponding Source.
- Page 39 QNAP JBOD Enclosure - TL-R1220Sep-RP/TL-R1620Sep-RP User Guide a. Disclaiming warranty or limiting liability differently from the terms of sections 15 and 16 of this License; or b. Requiring preservation of specified reasonable legal notices or author attributions in that material or in the Appropriate Legal Notices displayed by works containing it;...
- Page 40 QNAP JBOD Enclosure - TL-R1220Sep-RP/TL-R1620Sep-RP User Guide An “entity transaction” is a transaction transferring control of an organization, or substantially all assets of one, or subdividing an organization, or merging organizations. If propagation of a covered work results from an entity transaction, each party to that transaction who receives a copy of the work also...
- Page 41 QNAP JBOD Enclosure - TL-R1220Sep-RP/TL-R1620Sep-RP User Guide If conditions are imposed on you (whether by court order, agreement or otherwise) that contradict the conditions of this License, they do not excuse you from the conditions of this License. If you cannot convey a covered work so as to satisfy simultaneously your obligations under this License and any other pertinent obligations, then as a consequence you may not convey it at all.
- Page 42 Important Any modifications made to this device that are not approved by QNAP Systems, Inc. may void the authority granted to the user by the FCC to operate this equipment. VCCI Notice この装置は、クラス...
- Page 43 QNAP JBOD Enclosure - TL-R1220Sep-RP/TL-R1620Sep-RP User Guide BSMI Notice 警告使用者：這是甲類的資訊產品，在居住的環境中使用時，可能會造成射頻干擾，在 這種情況下，使用者會被要求採取某些適當的對策。 SJ/T 11364-2006 本产品符合中国 RoHS 标准。以下表格标示此产品中某有毒物质的含量符合中国 RoHS 标准规定的限量要求。 本产品上会附有”环境友好使用期限”的标签，此期限是估算这些物质”不会有泄漏或突变”的年限。本产品 可能包含有较短的环境友好使用期限的可替换元件，像是电池或灯管，这些元件将会单独标示出来。 部件名称 有毒有害物质或元素 铅 汞 镉 六价铬 多溴联苯 多溴二苯醚 (Pb) (Hg) (Cd) (CR(VI)) (PBB) (PBDE) 壳体 显示 印刷电路板 金属螺帽 电缆组装 风扇组装...
Need help?
Do you have a question about the TL-R1220Sep-RP and is the answer not in the manual?
Questions and answers