Philips OVU760001/01 Manual

Download this manual

Philips Home Control

Manual of OVU760001/01

©Philips Home Control,

Confidential

Page 1 of 6

2011

Page 2 No special accessory is required to enable the equipment to comply with the emission limits. Status :Draft, For Review Philips Proprietary & Confidential Page 2 of 6 Philips Home Control Company Restricted...
Page 3 .................. 4 PPLICATION VIEW RADIO FREQUENCY (RF) FUNCTIONALITY ................5 AIRING AND NPAIRING PRODUCT OVERVIEW Status :Draft, For Review Philips Proprietary & Confidential Page 3 of 6 Philips Home Control Company Restricted...
Page 4 RF dongle will only decode RF signals from the paired remote. Other RF remotes’ signals will be discarded. After decoding the RF signal, an IR generation process will be initiated. Status :Draft, For Review Philips Proprietary & Confidential Page 4 of 6 Philips Home Control Company Restricted...
Page 5 The initiator of pairing normally comes from the controller device which is usually the remote controls. For the OVU760001/01 dongle, there is no button so pairing is initiated when the dongle is powered up. The pairing period will last 15 seconds. During this pairing period, when the dongle is successfully paired with the remote, a pairing link is stored in the dongle pairing table.
Page 6: Product Overview
OVU760001/01 Manual (Draft Version) 3. PRODUCT OVERVIEW Picture for illustration only Status :Draft, For Review Philips Proprietary & Confidential Page 6 of 6 Philips Home Control Company Restricted...